Loading Enlighten Software

Loading Enlighten Software

The first step to working with Enlighten is to load the Software and drivers for the USB to DMX interface. This can be accomplished by the simple steps below.

1. Make sure the Windows machine is on and the USB to DMX interface is NOT Connected

2. Find the USB Drive supplied with the Enlighten Package and find the Enlighten Setup.exe file and double click on it.

3. If no USB drive is supplied the newest install file can be found at www.pcdmxsoftware.com/Enlighten%20Setup.exe

4. Follow the Installer instruction and select all the default options.

5. At the end of the install a black Pop-up Window will appear, this is the drivers for Enlighten Loading. Once Completed please restart your machine and plug in the USB cable to the USB to DMX interface and computer.

6. The installer will place a Enlighten shortcut on your desktop, double click it to start Enlighten for the first time.

    • Related Articles

    • Loading the Software for Disco

      The first step to working with Disco is to load the Software and drivers for the USB to DMX interface. This can be accomplished by the simple steps below. 1. Make sure the Windows machine is on and the USB to DMX interface is NOT Connected 2. Find ...

    • Enlighten Splitter User Manual

      Click the PDF below to download the Enlighten Splitter User Manual

    • Addressing Your Fixtures In Enlighten

      Once all the fixtures have been loaded you must address all fixtures in the DMX chain, in this section we will describe the steps needed to address each fixture. 1. Make sure you have hooked up all the fixtures from one to the other in a DMX chain. ...

    • How to Remove a Fixture in Enlighten

      There may be times when a fixtures needs to be removed from an existing show. First right click on the fixture to be removed and select the remove fixture option as show below. This will remove the fixture and refresh all presets to work correctly ...

    • Patch or Load Your Fixtures In Enlighten

      Once Enlighten is installed we need to set up the show to be compatible with your lights show. By default there is a demo show loaded into Enlighten at first startup. We will need to clear this and then take the steps to load your fixtures so we can ...