Update Disco Or Enlighten Dongles to work with Windows 8 USB 3.0
2. Unzip the contents to your desktop
3. run ftprog
4. press scan and parse to detect the hardware
5.
select file open template and select the workinMprog file
6. Press the
Program button(lightning icon)
7. A new window will pop up and,select the
device in the list and press
program button.
8. try it on the win8
system
WP
Related Articles
Fix 'Malfunction' Message on Windows 10 Machine
This must be done on the Windows 7 or xp Machine 1. Download http://www.enlightenpro.com/usbemergency.zip 2. Unzip the contents to your desktop 3. run ftprog 4. press scan and parse to detect the hardware 5. select file open template and select the ...
How to Install and Configure the Wing to Work with Enlighten
Make sure the control wing is connected to the pc with the supplied USB cable and the Control wing has the Power adaptor Plugged in to the back of the wing. WHen the control wing is connected and recognized by Windows, the blue Line Below the ...
Enlighten Splitter User Manual
Click the PDF below to download the Enlighten Splitter User Manual
Loading Enlighten Software
The first step to working with Enlighten is to load the Software and drivers for the USB to DMX interface. This can be accomplished by the simple steps below. 1. Make sure the Windows machine is on and the USB to DMX interface is NOT Connected 2. ...
Disco Splitter User Manual
Click the PDF below to download the Disco Splitter User Manual